

Save Space and Money on the Edge and in the Closet
- Increasing demand for high-speed connectivity
- Growing adoption of IoT devices technology
- Lack of available space
- And they’re cost-effective
Our patented technology provides easy to deploy, repeatable, cut and paste design to the IDF/MDF/Edge that:
- Takes up less space
- Provides the cable management critical to small spaces
- And reduces the need for expensive infrastructure retrofits
Z-PDS

Dual Power Redundancy and Concurrent Maintenance
The Z-PDS is the Swiss army knife of power distribution that reduces breaker positions and whips by up to 2/3.
Easy receptacle changes can be made by technicians rather than electricians using standard, NEMA twist-lock plug adapters.
Saves on capital and operational costs
Power Path Reliability (PPR)
Establishing Power Path Reliability requires flexibility and optimization. This is why the Z-PDS shines:
- A+B redundantly powered 3 phase RPP / PDU
- Requires only 2U in the rack
- Circuit breaker protection for each phase of each output
- Ability to pull single phase, split single phase, or 3 phase power in 208V, 415V and 480V flavors
Aviv Clinics
Case Study: Department of Veterans Affairs
It’s difficult for health care providers to find more space for circuit breakers, server space, more cables… in existing facilities. But that doesn’t stop the need for more power in the closet or following HIPPA requirements to protect patient information.
Zonit provided the VA with a blueprint to pair the Z-PDS with racks, UPSs, and vertical plug stirps to meet the needed dual power redundancy and concurrent maintenance their existing specifications required. Today, the VA is deploying the Z-PDS in their hospitals across the country.
Check out the VA Infrastructure Standard for Telecommunications Spaces here.
Download the Case Study

Case Study: Department of Veterans Affairs
It’s difficult for health care providers to find more space for circuit breakers, server space, more cables… in existing facilities. But that doesn’t stop the need for more power in the closet or following HIPPA requirements to protect patient information.
Zonit provided the VA with a blueprint to pair the Z-PDS with racks, UPSs, and vertical plug stirps to meet the needed dual power redundancy and concurrent maintenance their existing specifications required. Today, the VA is deploying the Z-PDS in their hospitals across the country.
Check out the VA Infrastructure Standard for Telecommunications Spaces here.

Download the Case Study
Z-LOCK

Z-LOCK was designed to help eliminate human errors and connectivity issues.
- Securely locks on both ends regardless of the brand of PDU, or manufacturer, of IT hardware.
- Eliminates accidental, vibration, and nuisance disconnects
- Lowest cost option for securing critical power paths
“At 33%, on-premise power failures cause the most outages [in data center environments], but network and connectivity issues come in a close second at 31%.”
Uptime Institute
For Data Centers of All Types
Not only do our dual locking cords come in handy in an Enterprise data center, but they’re also ideal for Core, Edge, and MDF / IDF closets.
According to the Uptime Institute, proper training and process improvements can address roughly 70% of the Data Center power failures caused by human error.
One easy to deploy imprvement is using Zonit dual-locking IEC power cords in all your data centers.
Z-ATS Micro

Redundant Power Guaranteed
The Z-ATS Micro was designed to automatically switch from the primary power source (A) to the backup source (B) as needed.
- It’s fast…in less than 14ms the load is secure
- Takes up ZERO-U in the rack
- No programming, software, or firmware updates
- Cost-effective 1-to-1 solution
Not only has the duration of unplanned outages lasted twice as long as partially planned outages, but their duration has also increased over the last 10 years.
Ponemon Institute© Research Report and The Uptime Institute
A Better ATS for the Data Center
Stop consuming multiple U with an expensive, multi-port ATS that is often under utilized. The Zonit Z-ATS Micro is simply the easiest and most cost-effective way to minimize downtime and provide redundant power at all times.
Click here to learn more about the Z-ATS that can switch between power sources at any phase angle – even 180 degrees out of phase.
“We have a copy/paste design solution that we don’t have to tweak from project to project.”
Siemens