Z-ATS Micro | Revolutionizing Data Center Power Reliability

A Zero U Automatic Transfer Switch for Uninterrupted Operations

Z-ATS Micro

Say goodbye to single-corded device vulnerabilities and hello to unprecedented reliability. The remarkable technology of the Z-ATS Micro provides millisecond transfer speeds that will minimize downtime, optimize redundancy, and conserve valuable rack space. This ultimate Automatic Transfer Switch is a game-changer.

Key Benefits:
The Z-ATS Micro’s compact size, similar to a cell phone, conserves valuable rack space in your data center. It adds redundancy to single-corded devices without adding bulk, allowing you to optimize your rack configurations.

The Groundbreaking Automatic Transfer Switch

Why Choose Z-ATS Micro​

Z-ATS Micro Product Shot

Enhanced Power Reliability​

The Z-ATS Micro ensures uninterrupted power supply to your servers by offering A and B redundant power sources to single-corded devices. This maximizes server power supply and minimizes the risk of cascading failures to keep your data center operations running smoothly.

Z-ATS Micro Closeup

Rapid Deployment

The Z-ATS Micro can be deployed in less than 30 seconds, making it a swift and efficient solution for critical power needs. This quick setup minimizes downtime during installation and maintenance, saving you valuable time and resources.

Z ATS Micro Automatic Transfer Switch

Precise Switching

With the ability to switch seamlessly between A and B power sources at any phase angle, including 180 degrees, Z-ATS Micro provides precise control over power distribution. This ensures continuous and uninterrupted operations during power source transitions-even under challenging conditions.

Zonit-μATS

Universal Compatibility

The Z-ATS Micro is designed to work seamlessly with a wide range of data center equipment and power distribution units (PDUs). Its universal compatibility ensures you can integrate it into your existing infrastructure without compatibility concerns.

Specifications | Z-ATS Micro LV

Electrical
Rated Input Voltage
120 V
Rated Input Amperage
12 amps
Input Frequency
60 Hz
Standard Input Cords
2’ or 6’, 16AWG
Standard Output Cords
(Int) No output cord (Y) 1’ or 6’ 16AWG
Input Connector Options
NEMA 5-15P, L5-15P
Output Connector Options
C13, C15 (standard and Z-LOCK), NEMA 5-15R, Q5-15R, & L5-15R
Internal Overload Protection
Virtual Circuit Breaker set at rated amperage with reset switch
Transfer Time
9 to 14ms
Max Power Consumption
@120V: (Int) 5 ma on A side, 13 ma on B side. (Y) 6 ma on A side, 12 ma on B side
Approvals
Safety
UL/cUL File E340237, FCC Part B, CE
Physical
Dimensions (L x W x D)
1 x 1 11/16 x 4 5/8 in
Weight
0.9 lbs
Weight (Y 11” output)
2’ input .77lb, 6’ in 1.6lb
Weight (Y 6’ output)
2’ input 1.1lb, 6’ in 2.0lb
Environmental
Elevation - Operating
0 to 10,000 ft (0 to 3000m)
Elevation - Storage
0 to 50,000 ft (0 to 15000m)
Temp - Operating
32 to 110ºF (0 to 43.3ºC)
Temp – Storage
0 to 110ºF (-17.7 to 43.3ºC)
Operating Humidity
0 to 95% Non-condensing

Specifications | Z-ATS Micro HV

Electrical
Rated Input Voltage
208 V
Rated Input Amperage
8 amps
Input Frequency
60 Hz
Standard Input Cords
2’ or 6’, 16AWG
Standard Output Cords
(Int) No output cord (Y) 1’ or 6’ 16AWG
Input Connector Options
NEMA 5-15P, L5-15P
Output Connector Options
C13, C15 (standard and Z-LOCK), NEMA 5-15R, Q5-15R, & L5-15R
Internal Overload Protection
Virtual Circuit Breaker set at rated amperage with reset switch
Transfer Time
9 to 14ms
Max Power Consumption
@120V: (Int) 5 ma on A side, 13 ma on B side. (Y) 6 ma on A side, 12 ma on B side
Approvals
Safety
UL/cUL File E340237, FCC Part B, CE
Physical
Dimensions (L x W x D)
1 x 1 11/16 x 4 5/8 in
Weight
0.9 lbs
Weight (Y 11” output)
2’ input .77lb, 6’ in 1.6lb
Weight (Y 6’ output)
2’ input 1.1lb, 6’ in 2.0lb
Environmental
Elevation - Operating
0 to 10,000 ft (0 to 3000m)
Elevation - Storage
0 to 50,000 ft (0 to 15000m)
Temp - Operating
32 to 110ºF (0 to 43.3ºC)
Temp – Storage
0 to 110ºF (-17.7 to 43.3ºC)
Operating Humidity
0 to 95% Non-condensing

Specifications | Z-ATS Micro HVE

Electrical
Rated Input Voltage
230 V
Rated Input Amperage
8 amps
Input Frequency
50 Hz
Standard Input Cords
.6 m or 1.8 m, 18AWG
Standard Output Cords
(Int) No output cord (Y) .3 m or 1.8 m 18AWG
Input Connector Options
IEC C14, Z-LOCK C14
Output Connector Options
IEC C13 and C15 (standard and Z-LOCK)
Internal Overload Protection
Virtual Circuit Breaker set at rated amperage with reset switch
Transfer Time
9 to 14ms
Max Power Consumption
@240V: 7 ma on A side, 13 ma on B side.
Approvals
Safety
UL/cUL File E340237, FCC Part B, CE
Physical
Dimensions (L x W x D)
2.5 x 4.4 x 11.6 cm
Weight
0.6 m input .29 kg, 1.8 m is .49 kg
Weight (Y 11” output)
0.6 m input .34 kg, 1.8 m is .54 kg
Weight (Y 6’ output)
0.6 m input .45 kg, 1.8 m is .72 kg
Environmental
Elevation - Operating
0 to 3,048 m
Elevation - Storage
0 to 15,240 m
Temp - Operating
32 to 110ºF (0 to 43ºC)
Temp – Storage
0 to 110ºF (-18 to 43ºC)
Operating Humidity
0 to 95% Non-condensing

READ IT

Mitigation of Accidental Disconnects
and Improved Data Center Uptime

Siemens, whose clients include Microsoft and Citi, is a global manufacturing company specializing in healthcare, power, and automation, faced significant challenges in designing control panels for datacenter infrastructure. These control panels are crucial for maintaining power and cooling in data centers, making them a critical point of failure if not designed effectively. Siemens aimed to create cost-effective and reliable panels that could support data center facilities from commissioning to operations. 

The introduction of Zonit’s Z-ATS Micro provided a compact, efficient, and cost-effective solution. The Z-ATS Micro replaced the UPS units, improved reliability, and simplified the control panel design leading to a copy/paste design approach that ensured high reliability throughout the data center lifecycle. The Zonit Z-ATS has become an integral part of Siemens’ control panels, contributing to the reliability of today’s largest data centers, including design, commissioning, operation, and maintenance phases.

The groundbreaking Automatic Transfer Switch system that revolutionizes data center redundancy.

Z-LOCK Technology

The Z-ATS Micro uses Z-LOCK locking technology that prevents accidental disconnections of power cords during equipment installations or maintenance. This eliminates the risk of unplanned outages caused by human error or equipment vibrations.

Reduce Downtime

By replacing single-corded devices with Z-ATS Micro, you significantly reduce the likelihood of downtime due to power-related issues. This improvement in uptime enhances the overall reliability of your data center operations, leading to increased productivity and customer satisfaction.

Download Z-ATS Micro Product Sheets

Click document name to view, download and/or print.

Z-ATS Micro: The Groundbreaking Automatic Transfer Switch System That Revolutionizes Data Center Redundancy

Scroll to Top